Triple tangent flank milling of ruled surfaces

This paper presents a positioning strategy for flank milling ruled surfaces. It is a modification of a positioning method developed by Bedi et al. [Comput Aided Des 35 (2003) 293]. A cylindrical cutting tool is initially positioned tangential to the two boundary curves on a ruled surface. Optimization is used to move these tangential points to different curves on the ruled surface to reduce the error. A second optimization step is used to additionally make the tool tangent to a rule line, further reducing the error and resulting in a tool position, where the tool is positioned tangential to two guiding rails and one rule line. The resulting surface has 88% less under cutting than the method of Bedi et al.     

机车大功率整流管试验台的研制

本文基于计算机技术和现代测量技术，介绍了一种虚拟仪器-机车大功率整流管试验台的研制。该试验台根据LMS自适应算法，模拟实际工作环境，自适应地控制试验过程，并对试验数据应用小波分析技术分析处理，得到机车大功率整流管准确而全面的性能参数，具有自动化程度高、试验结果可靠性高的优点。本文主要介绍试验数据处理和软件设计。     

虚拟企业图纸数据传输

图纸数据是企业间合作需交换的一种重要的信息。本文分析了虚拟企业环境下企业之间交换图纸数据的要求，提出了一种具体的解决方案，并给出实例。     

一种新的机器人手臂控制方法

从机器人手臂的关节电机力学出发，本文提出了一种独立于现行机器人关节控制器的离线补偿方法，通过对－２自由度机器人的数值研究，证明该法不仅能有效地克服由于惯性负载，关节间耦合与重力效应给控制系统带来的动态精度问题，而且还可以消除由于控制系统本身的固有特性所决定的系统的跟踪误差。     

大规模电力系统不对称短路的分块射影解法

本文把网络的分块射影法用于大规模电力系统不对称短路的分析计算。研究表明：该方法对短路计算是可行的。一旦求出了射影张量，即可重复用于后续的计算，只需改变故障所在的那一个子网络的射影张量。本文提出的网络分块射影算法为大规模电力系统的分析计算提供了一条崭新的途径。     

基于OpenGL五轴联动数控仿真系统碰撞干涉检验实时仿真技术及算法研究

介绍了Com-5NCSS五轴联动数控仿真系统运用的“实时仿真”技术，在此基础上提出基于规则实体表面网格化遍历的八叉树单球组合模型，该模型应用于Com-5NCSS仿真系统中，实现了碰撞干涉的快速检测，满足了数控仿真系统的“实时性”要求。     

Laser scanning path generation considering photopolymer solidification in micro-stereolithography

It is essential to automate the scanning path generation process to effectively implement the micro-stereolithography. However, a scanning path that is generated based only on a 3D CAD model introduces dimensional inaccuracies. In micro-stereolithography, the photopolymer solidification is affected by fabrication conditions, such as the optical properties (laser power, laser scanning speed, laser scanning pitch focusing condition, etc.) and material properties of the photopolymer. Thus, the photopolymer solidification phenomena must be considered when generating a laser scanning path. In this paper, a scanning path generation algorithm that uses 3D CAD data and considers the photopolymer solidification phenomena is proposed to improve the dimensional accuracy in micro-stereolithography. Multi-line photopolymer solidification experiments were performed for various laser scanning conditions to examine the photopolymer solidification phenomena. From these experiments, linear relations between the solidification length (width) and scanning length (width) were acquired and stored in a database. Subsequently, these data were utilized to compensate the scanning path of the laser beam. In addition, experiments for determining the layer thickness in the z-direction were performed and these results were also used in the scanning path generation algorithm.This research was supported by the Highly Advanced National Project (http://www.most.go.kr), which performs some of the National R&D Program, and sponsored by the Korean Ministry of Science and Technology under the contract project code M10214000116-02B1500-02010.     

On the relationships among latent variables and residuals in PLS path modeling: The formative-reflective scheme

A new approach for the estimation and the validation of a structural equation model with a formative-reflective scheme is presented. The basis of the paper is a proposal for overcoming a potential deficiency of PLS path modeling. In the PLS approach the reflective scheme assumed for the endogenous latent variables (LVs) is inverted; moreover, the model errors are not explicitly taken into account for the estimation of the endogenous LVs. The proposed approach utilizes all the relevant information in the formative manifest variables (MVs) providing solutions which respect the causal structure of the model. The estimation procedure is based on the optimization of the redundancy criterion. The new approach, entitled redundancy analysis approach to path modeling (RA-PM) is compared with both traditional PLS Path Modeling and LISREL methodology, on the basis of real and simulated data.     

水力自动翻板闸门的瞬心轨迹及其对稳定性的影响

分析了连杆滚轮式水力自动翻板闸门的运动轨迹，并由此得出闸门动、静坐标系间的转换关系．结合翻板闸门的运转机理，探讨了闸门在运行过程中的瞬心轨迹线及其对闸门稳定性的影响．结果表明，通过优化闸门结构可调整“瞬心”的位置，保证闸门运转的稳定性．